Biathlon clamp – is used for mounting SCATT optical sensors on barrels with diameters of 16, 18, 19 and 22 mm.Does not shift during the rifle's recoil when training with a live shot.

Optical sensor mount for archery – allows to mount SCATT optical sensor on bows. The mount is fixed with the vibration damper screw and allows adjusting position of the optical sensor in two axis (vertical and horizontal) in the range of +/- 150

Control unit interface cable- Type A-B- Used to connect the control unit to USB port of computer- Has a length of 1.5m

Electronic target - (Model: WT-01) - Installed instead of the usual target - Powered by the target control, no need for external power supply- Exercise and distance can be varied - Electronic targets can be used at distances from 5 to 12 meters, which allows to train at different places- Usable for LG, LP or self-printed target- Only suitable for indoor use- Red/green LED's on top and bottom for traffic light simulation (sport pistol duel)- The target has a built-in wireless connection and can be used with the  wireless optical SCATT sensors - The target is made of durable ABS plastic and can withstand bullets from an air rifle- The SCATT protect frame is necessary for parallel operation in the shooting range!

SCATT D12 HolderThe SCATT D12 Holder is a permanent mount for attaching a SCATT training sensor to an air pistol. The holder is mounted directly onto the barrel, ensuring a stable and repeatable sensor position – the ideal foundation for precise and reliable SCATT training.For air pistols equipped with a barrel shroud, the shroud must be removed before installing the D12 Holder.- Permanent mount for SCATT sensors on air pistols- Direct barrel mounting- Stable and repeatable sensor positioning- Ideal for permanent SCATT training- Simple and secure installation- For pistols with a barrel shroud, the barrel shroud must be removed before installation

- Symmetrical design- Sensor can be mounted on both sides- Combination with 2 sensor weights for exactly the same weight conditions for training and competition- Stainless steel- suitable for barrel diameter Ø19.3 - Ø20.0 mm- Weight 40g

For mounting the optical sensor (MX) to Pardini SP and SP Rapid Fire

- Fits all SCATT holders- Weight 46 g similar to the SCATT sensor MX-02 + cable weight component- stainless

- Compatible with all SCATT mounts- Weight: 56 g, identical to the sensor of the SCATT MX-W2- Rustproof

- Suitable for all Steyr LP with barrel jacket (also EVO and EVO10)- Clamp mounting- stainless- Weight 5g

- Metal strut designed to protect the SCATT-Sensor- Fits in all UIT profile rails

Optical sensor interface cable - Used to connect the optical sensor OS-01 to an USB port of the computer- Has a length of 3m

- For MX-02 and a safe mounting in case of strong recoil- Prism inc. 2  Universal sensor holding clamps- Bracket for mounting the optical sensor on barrels and air cylinders.- Allows swiveling around the barrel axis.

- Used for fixing optical sensor on the barrel- All-purpose mounting prism for the SCATT Mounting plate

WHILE STOCK LASTSBarrel adapter- Are used to secure the optical sensor on the barrels less than 20 mm diameter

- Used to mount the optical sensor on the short-guns- Available in differnt calibers 

SCATT BasicSCATT Basic - is the newest, and least expensive model among all SCATT training systemsThis model is designed to be a great training tool for juniors, beginners, and mid-level shooters who want to take the smartest route to improve their scores, and shooting technique.It is capable of working inside and outside, at distances of 2.5 meters and above, and supports both dry-fire and live-fire training.Another standout feature of this model in comparison to other SCATT systems is the lack of an electronic target.Which means that now you will be able to train by simply using a paper target or a standard target installation (i.e. SIUS). In live fire training you don’t have to worry anymore about damaging the expensive device.

- Optical sensor mount for archery - The mount is fixed with vibration damper screws- Adjusting position of the optical sensor in two axis

- Used for mounting the optical sensor on barrels of 20 mm diameter- Weight 10 grams

- used for mounting the SCATT optical sensor on barrels of 20, 21, 22 and 23.5 mm diameters- weight 14 gramsDOES NOT FIT FOR AR

- Used to mounting the optical sensor on barrels from 6 till 19 mm diameter- Weight 13 grams- Optimal holder for the free pistol

WHILE STOCKS LAST! SCATT Diaphragm for the old long SCATT MX-02 sensors. 

- Used for fixing optical sensor on the barrels of different diameters- Made of stainless steel 0.2 mm

Mounting plate XXL — used for fixing optical sensor on the barrels of big diameters or cross-sections.Made of stainless steel 0.2 mm.- Length 150 mm