Biathlon clamp – is used for mounting SCATT optical sensors on barrels with diameters of 16, 18, 19 and 22 mm.Does not shift during the rifle's recoil when training with a live shot.
Optical sensor mount for archery – allows to mount SCATT optical sensor on bows. The mount is fixed with the vibration damper screw and allows adjusting position of the optical sensor in two axis (vertical and horizontal) in the range of +/- 150
SCATT D12 HolderThe SCATT D12 Holder is a permanent mount for attaching a SCATT training sensor to an air pistol. The holder is mounted directly onto the barrel, ensuring a stable and repeatable sensor position – the ideal foundation for precise and reliable SCATT training.For air pistols equipped with a barrel shroud, the shroud must be removed before installing the D12 Holder.- Permanent mount for SCATT sensors on air pistols- Direct barrel mounting- Stable and repeatable sensor positioning- Ideal for permanent SCATT training- Simple and secure installation- For pistols with a barrel shroud, the barrel shroud must be removed before installation
- Symmetrical design- Sensor can be mounted on both sides- Combination with 2 sensor weights for exactly the same weight conditions for training and competition- Stainless steel- suitable for barrel diameter Ø19.3 - Ø20.0 mm- Weight 40g
For mounting the optical sensor (MX) to Pardini SP and SP Rapid Fire
- Fits all SCATT holders- Weight 46 g similar to the SCATT sensor MX-02 + cable weight component- stainless
- Compatible with all SCATT mounts- Weight: 56 g, identical to the sensor of the SCATT MX-W2- Rustproof
- Suitable for all Steyr LP with barrel jacket (also EVO and EVO10)- Clamp mounting- stainless- Weight 5g
- For MX-02 and a safe mounting in case of strong recoil- Prism inc. 2 Universal sensor holding clamps- Bracket for mounting the optical sensor on barrels and air cylinders.- Allows swiveling around the barrel axis.
- Used for fixing optical sensor on the barrel- All-purpose mounting prism for the SCATT Mounting plate
WHILE STOCK LASTSBarrel adapter- Are used to secure the optical sensor on the barrels less than 20 mm diameter
- Used to mount the optical sensor on the short-guns- Available in differnt calibers
- Optical sensor mount for archery - The mount is fixed with vibration damper screws- Adjusting position of the optical sensor in two axis
- Used for mounting the optical sensor on barrels of 20 mm diameter- Weight 10 grams
- used for mounting the SCATT optical sensor on barrels of 20, 21, 22 and 23.5 mm diameters- weight 14 gramsDOES NOT FIT FOR AR
- Used to mounting the optical sensor on barrels from 6 till 19 mm diameter- Weight 13 grams- Optimal holder for the free pistol
- Used for fixing optical sensor on the barrels of different diameters- Made of stainless steel 0.2 mm
Mounting plate XXL — used for fixing optical sensor on the barrels of big diameters or cross-sections.Made of stainless steel 0.2 mm.- Length 150 mm
- Used for fixing optical sensor on the barrel or gas cylinder.- Allows you to change angle of the optical sensor attachment relative to the axis of bore.- Relevant for training at a small distances to electronic target- Reduction of the parallax.
Barrel adapter- used for mounting the optical sensor on rifles, shotguns, pistols, crossbows, etc. with Picatinny/Weaver rail.- weight: 28 gramm
- Used to mount the optical sensor WS-M01 on barrels (and other cylindrical parts of the arms) of various diameters.- Can be used with other fasteners (barrel inserts, clamp D-20 , set of fasteners ). - Weight 9 grams.
Used for mounting the optical sensor on the Steyr LP10 and Evo10 pistols.Weight 4,1 g
- Mount for attaching the optical sensor to barrels and compressed air cylinders - Allows rotation around the barrel axis - Calibration range adjustment using the set screws for training at shorter distances (distance between sensor and target) - Reduces parallax - Includes SCATT universal sensor mounting clamp
SVD clamp - is used for mounting SCATT optical sensors on barrel of Dragunov sniper rifle. -Suitable for live firing practice.